It is best to avoid traveling at night. Proper visibility is crucial if you are required to drive at night. Keep your windshield clean, and ensure that all lights are on. Make sure to align your headlights with your seat position. Also, don’t put them too high because they can cause interference for other motorists. The high beam should not be used while you are overtaking, or when the vehicle ahead is close. Remain alert at all costs.
Driving at night is more dangerous than driving during daylight hours. The roads are more beautiful at night than during the day. They also look much cleaner. However, they are more dangerous than day driving. Visibility is the most important difference between night and normal driving. After sunset, our vision is affected by low contrast colors and further limited by the glare caused by headlights coming from vehicles behind us. It is important to remember some basic rules for night driving safety and enjoyment.
Check light
Make sure to check all lights on the car. Fused or dirty lights can cause visibility problems for the driver, including the brake lights, fog lights, indicators, and headlights. It could also be used to not notify other vehicles of your presence.
Clean windows and windscreens
To help drivers see the road clearly, it is vital to keep these clear. You must ensure that the windshield washer is always full and that the wipers are functioning properly to keep it clean.
Rearview mirrors
The latest cars come with rearview mirrors with night and day settings. You can adjust the angle and reflectivity of the mirror to reduce the glare caused by the headlights from vehicles behind you. Adjusting the ORVMs (Outside View Mirror/Wing Mirror) should be done in conjunction with the rearview mirror so that high beams from the headlights are not blinding the driver.
Don’t speed
It is important to drive slowly at night, where pedestrians and cyclists are hard to see. It is important to keep a healthy distance between you and your vehicle ahead to avoid mishaps in the event of panic stops.
Understanding the use of high beams
Avoid driving with high beams in crowded areas to blind others and cause havoc. It is best to use a high beam if you have clear roads and the lights are not dim. If you do see a vehicle approaching, switch to low beam immediately. Even if the other driver isn’t, it doesn’t hurt to be polite. Do not look into the beams of approaching vehicles if they don’t lower them. It could cause blindness or blurred vision. Instead, you can focus on the white line at the road and drive on your side.
Learn to flash dipper
You should also learn how to use the horn and how to flash the dipper. We’re so used to honking, we often ignore it. You should be extra careful, especially if there are drunk drivers in the vicinity. While flashing your headlights should not blind approaching drivers, it is important to use your dipper only when you are turning, overtaking, or crossing.
Be cautious of drunk drivers
Even if it’s not something you do, others might. Driving requires that you drive defensively, not aggressively. Although drunk drivers are not likely to speed up or swerve, they can ignore stop signs or signals. Sometimes they may even switch lanes at will.
Do not drive at night if tired
You shouldn’t drive if you are tired. But, it is important to follow this rule, especially at night. Night driving requires a lot more concentration and diligence. You can get off the main roads if you feel tired. Stop at a gas station or other petrol station to stretch your legs and then wash your face. You should not gamble your night driving in this scenario. If you lose, it could end up costing your life. Take care, be cautious and drive safely.
Pass first go offers Perth driving lessonsthat will guide you important techniques and helps you in becoming a confident driver